You have no items in your shopping cart.
Details
The Model KN is a secondary regulator designed for maximum sensitivity and simple, trouble free operation. Standard 039-122 KN Regulator (zero governor) with 3/4" fnpt inlet, 3/8" outlet, inlet pressure 6oz, max Inlet 8oz, orifice 7/16", with manual primer button on back or safety primer pin for manual priming. The repair kit (not shown) has everything needed to repair any KN regulator. It is suitable for use with low pressure, Natural Gas and LPG Vapor fuels. This regulator is typically used in service applications up to 30 kW (40 hp). A new high flow capacity unit is also available with a ½” orifice, suited for service applications up to 37 kW (50hp). The KN regulator is completely rebuildable using an IMPCO repair kit.
Specifications |
|||||||||
---|---|---|---|---|---|---|---|---|---|
Fuel Type | LPG Vapor or Natural Gas Vapor | ||||||||
Inlet Pressure |
|
||||||||
Horsepower |
|
||||||||
Operating Temperature Range | -40° F to +250° F (-40° C to +121° C | ||||||||
Mounting Position | As close to the carburetor as possible with the arrow on the back over pointing up to minimize the effects of gravity on diaphragm travel. Hori- zontal position can be used when fuel contamination can be controlled with HD-5 or HD-10 specified LPG fuel. | ||||||||
Diaphragm Material | Silicone | ||||||||
Applications | Stationary | ||||||||
Certification | UL 3MYL |
Additional Information
Prop 65 Warning for California Residents WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.039-122 Low Pressure Regulator
Cross References
g-kn, garretson, garretson-039-99
In stock